Install your own solar — and do it right.
What you need, how to size it, and how the install goes, from someone who installs it for a living. Panels, inverters, batteries, and solar-powered mini splits and AC.
Solar AC Setup — Cooling a Home with Solar
DIY EG4 Solar Window AC Installation – Start to Finish
First, pick your system type
Grid-tied
Panels power your home and send extra to the utility. Cheapest per watt, but shuts off in an outage. Usually needs a permit, an inspection and utility approval.
Off-grid
Panels plus batteries, no utility. Great for shops, cabins, sheds and barns. Size the batteries for the nights and cloudy days you need to cover.
Hybrid
Grid connection plus batteries. Uses solar first, stores the extra, and keeps your critical loads running when the power goes out.
Easiest first project: a solar mini split or solar window AC. They run straight off a few panels during the day with no batteries. See those installs ↓
What you need
- Solar panels. Check the wattage, the open-circuit voltage (Voc) and the short-circuit current (Isc). You need those numbers to size your strings.
- Inverter or all-in-one. Converts DC from the panels into AC for your home. Hybrid all-in-one units include the charge controller and battery charging.
- Batteries (optional). LiFePO4 batteries are the standard now. Match the battery voltage to your inverter (for example 48V).
- Racking. Roof mounts (metal or shingle) or a ground mount. Use the attachments made for your roof type.
- Wire, MC4 connectors and a proper crimper. Bad crimps cause most DIY connection problems.
- Disconnects, breakers and fuses. PV disconnect, battery breaker or fuse, and an AC breaker sized to your inverter's output.
- Grounding and surge protection. Bond the racking and equipment per code.
Signature Solar — $50 off
EG4 inverters, batteries, panels and kits. Grab my always-current discount code here.
Get the codeSolar Tool Pro
Sizing calculators, inverter fault codes and equipment data for solar installers and DIYers.
Open Solar Tool ProQuick array sizing
A starting point. Solar Tool Pro has the full inverter, battery and string calculators.
Array kW = daily kWh ÷ sun hours ÷ (1 − losses). Losses cover heat, wiring, inverter and dirt. Before you buy, check each string's cold-weather voltage against your inverter's maximum PV input.
Solar Sizing Math Made Simple (Inverter, Batteries, Panels)
How Many Solar Panels Do You Need for a Solar Mini-Split?
The install, step by step
Load list
List what you want to power and how many hours a day. That's your kWh target.
Size and pick parts
Array, inverter, batteries. Match voltages and check the inverter's PV input limits.
Permits
Check with your building department and, for grid-tied, your utility before you buy.
Mount
Lay out, install the attachments and rails, then set and clamp the panels.
Wire and protect
Crimp MC4s, run the strings, install disconnects and breakers, and ground everything.
Commission
Verify string voltage and polarity before connecting, then power up and set up monitoring.
Real install videos
Roofs, wiring, inverters and solar-powered mini splits.
How to Install an EG4 Solar Mini Split (Full Guide)
EG4 Multi-Zone Solar Mini Split Installation Step by Step
Installing Solar Panels on Metal Roofs Without Damage
The Best Way to Crimp MC4 Connectors for Solar
Do Solar Air Conditioners Work at Night?
How Many Solar Panels Do You Need for a Solar Mini-Split?
Solar Tips for Everyone
Everything solar on the channel — panels, batteries, inverters and off-grid power.
Open full playlist on YouTube →Going solar with a mini split?
Solar mini splits are the most popular DIY solar project on the channel.
Mini Split Training
My full mini split course — how they work, maintenance, repair, sizing and install. 45 videos, quizzes and a certificate.
Mini Split Training (Paperback)
108-page full-color field manual with real photos, component testing, multi-zone, and 200+ practice questions.
AC Tool Pro
Diagnose in heating or cooling mode, PT charts, airflow and BTU calculators, and a 3D view of every component. Used by 200+ techs.
Installing a mini split yourself? DIY Mini Split Install · Sizing one? Mini Split Size
Who's teaching this?
I'm Taddy — a licensed mechanical contractor in Tennessee with 20 years in the field. I run Fuller Heating and Cooling and the Taddy Digest YouTube channel, where 250,000+ techs, students and homeowners learn HVAC and solar from real jobs, not textbooks. I'll keep you cool if you let me.
DIY solar questions
Can I install solar panels myself?
Many homeowners do part or all of the work themselves, especially for off-grid systems, sheds, cabins and solar mini splits. Grid-tied systems usually need a permit, an inspection and utility approval, and the connection to your main panel should be done by a licensed electrician where your local code requires it.
How many solar panels do I need?
Start with how many kWh you use per day (from your power bill or a load list). Divide by your area's peak sun hours, then allow for losses — roughly 20–25%. That gives you the array size in kilowatts. Divide by your panel wattage to get the panel count.
Do I need batteries?
Not always. A grid-tied system can run without batteries, and solar mini splits and solar AC units can run directly off panels during the day. Batteries let you store power for night and for outages.
What's the difference between grid-tied, off-grid and hybrid?
Grid-tied systems feed your home and the grid and shut down in an outage. Off-grid systems run on panels and batteries with no utility connection. Hybrid systems do both: they connect to the grid but also use batteries for backup.
Does solar work at night or on cloudy days?
Panels produce much less on cloudy days and nothing at night. To run things after dark you need batteries or the grid.